PEG-20M毛細管柱測定 高分子材料浸提液中環氧乙烷遷移量
如果你感興趣的話，可以電話：0632-5667636 
產品名稱：PEG-20M毛細管柱測定 高分子材料浸提液中環氧乙烷遷移量
產品型號：PEG-20M毛細管柱測定
產品廠商：浩瀚色譜（山東）應用技術開發有限公司
簡單介紹
高分子材料浸提液中環氧乙烷遷移量 ，液化石油氣，二甲醚，甲縮醛，乙縮醛，乙醇，室內空氣，焦爐煤氣，煉廠氣，天然氣，變壓器油，多氯聯苯，植物油，增塑劑，過氧化物，增塑劑，甲縮醛
PEG-20M毛細管柱測定 高分子材料浸提液中環氧乙烷遷移量的詳細介紹
高分子材料浸提液中環氧乙烷遷移量
高分子材料浸提液中環氧乙烷遷移量 詳細信息：
名稱：毛細管柱
規格：30m*0.32mm*0.5um
型號：PEG-20M
應用：植入性醫療器械 高分子材料 浸提液中有毒有害物質的測定第 10 部分：環氧乙烷遷移量 氣相色譜法
高分子材料浸提液中環氧乙烷遷移量 測試譜圖：
Migration of ethylene oxide in polymer material extract
Migration amount of ethylene oxide in polymer material extracting solution Details:
Name: Capillary Column
Specification: 30m*0.32mm*0.5um
Model: PEG-20M
Application: Implantable medical devices, Polymer materials, Determination of toxic and hazardous substances in extracts. Part 10: Migration of ethylene oxide, Gas chromatography
1 Scope
This standard specifies the gas chromatography of ethylene oxide migration in polymer material extracts of implantable medical devices sterilized by ethylene oxide
Method of determination.
This standard applies to the determination of the migration of ethylene oxide in polymer material extracts of implantable medical devices sterilized by ethylene oxide.
The detection limit of ethylene oxide in this method is 0.1 mg/L.
2 Normative references
The following docu
Pieces. For undated reference docu
GB/T 6682 Analytical laboratory water specifications and experimental methods
GB/T 16886.12 Biological e
3 Principles of the method
Place the sample to be tested in a closed container, and heat it up to make the volatile compo
When the phases reach equilibrium, the gas in the headspace is directly extracted for gas chromatographic analysis. Qualitative by retention time, quantification by peak area, using external standard
Quantitative
Test spectrum of ethylene oxide migration in polymer material extract:
高分子材料浸提液中環氧乙烷遷移量 詳細信息：
名稱：毛細管柱
規格：30m*0.32mm*0.5um
型號：PEG-20M
應用：植入性醫療器械 高分子材料 浸提液中有毒有害物質的測定第 10 部分：環氧乙烷遷移量 氣相色譜法
1 范圍
本標準規定了經環氧乙烷滅菌的植入性醫療器械高分子材料浸提液中環氧乙烷遷移量的氣相色譜
法的測定方法。
本標準適用于經環氧乙烷滅菌的植入性醫療器械高分子材料浸提液中環氧乙烷遷移量的測定。
本方法環氧乙烷的檢出限為0.1 mg/L。
2 規范性引用文件
下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文
件。凡是不注日期的引用文件，其新版本（包括所有的修改單）適用于本文件。
GB/T 6682 分析實驗室用水規格和實驗方法
GB/T 16886.12 醫療器械生物學評價 第12部分：樣品制備與參照材料
3 方法原理
將待測樣品置入一密閉的容器中，通過加熱升溫使揮發性組分從樣品基體中揮發出來，在氣液兩
相中達到平衡，直接抽取頂空部分氣體進行氣相色譜分析。以保留時間定性，峰面積定量，采用外標
法定量
高分子材料浸提液中環氧乙烷遷移量 測試譜圖：
Migration of ethylene oxide in polymer material extract
Migration amount of ethylene oxide in polymer material extracting solution Details:
Name: Capillary Column
Specification: 30m*0.32mm*0.5um
Model: PEG-20M
Application: Implantable medical devices, Polymer materials, Determination of toxic and hazardous substances in extracts. Part 10: Migration of ethylene oxide, Gas chromatography
1 Scope
This standard specifies the gas chromatography of ethylene oxide migration in polymer material extracts of implantable medical devices sterilized by ethylene oxide
Method of determination.
This standard applies to the determination of the migration of ethylene oxide in polymer material extracts of implantable medical devices sterilized by ethylene oxide.
The detection limit of ethylene oxide in this method is 0.1 mg/L.
2 Normative references
The following docu
Pieces. For undated reference docu
GB/T 6682 Analytical laboratory water specifications and experimental methods
GB/T 16886.12 Biological e
3 Principles of the method
Place the sample to be tested in a closed container, and heat it up to make the volatile compo
When the phases reach equilibrium, the gas in the headspace is directly extracted for gas chromatographic analysis. Qualitative by retention time, quantification by peak area, using external standard
Quantitative
Test spectrum of ethylene oxide migration in polymer material extract:
相關產品
在線留言 |
