空氣和廢氣中吡啶檢測分析, 變壓器油，多氯聯苯，增塑劑，塑化劑，消毒劑，氨水，氨氣，變壓器油溶解氣，醫療器械，環氧乙烷，氨水，氨氣，三甲胺，二甲醚，乙縮醛，苯系物，雜醇油

空氣和廢氣中吡啶檢測分析
空氣和廢氣中吡啶檢測分析 詳細信息：

名稱：毛細管柱
固定液：交聯鍵合聚乙二醇
規格：30 m?0.25 mm，0.5 ?m 膜厚
型號：PEG-20M
應用：《環境空氣和廢氣 吡啶的測定氣相色譜法》

隨著社會的發展和人民生活水平的不斷提高，人們對于生活和生產環境的要求也越來越高，其空氣質量也越來越受到人們的重視。毗啶作為空氣和廢氣中含量較多的一種，其存在極容易引起人們身體不適，甚是造成身體健康威脅。因此，在工作中做好空氣和廢氣中的吡啶檢測極為關鍵，也是目前有關工作人員研究的主要方法。

浩瀚色譜（山東）應用技術開發有限公司主要研究了采用5％的乙醇水溶液作為主要的吸收液，直接植入1uL，然后采用氣相色譜儀進行分析，以氫火焰檢測器檢測分析得出空氣和廢棄中的吡啶含量。經有實驗得出，其中吡啶含量為0．01mg／L，吸收率為98％；標準偏差率為8％，曲線抽樣相關標準值為Y=0．9993。根據有關標準進行研究，這些數值均能夠滿足預計標準，因此符合該物質便捷、準確、快速的檢測要求。

空氣和廢氣中吡啶檢測分析 測試譜圖：




Detection and analysis of pyridine in air and exhaust gas
Detection and analysis of pyridine in air and exhaust gas Details:

Name: Capillary Column
Fixing fluid: cross-linked polyethylene glycol
Specification: 30 m?0.25 mm, 0.5 ?m film thickness
Model: PEG-20M
Application: "Ambient Air and Waste Gas Determination of Pyridine Gas Chromatography"

With the development of society and the continuous improvement of people's living standards, people have higher and higher requirements for the living and production environment, and their air quality has received more and more attention. As one of the more abundant air and exhaust gases, pyridine is very easy to cause people's physical discomfort and even threaten their health. Therefore, it is very important to do a good job in the detection of pyridine in the air and exhaust gas, and it is also the main method researched by the relevant staff.

Haohan Chromatography (Shandong) Application Technology Development Co., Ltd. mainly studied the use of 5% ethanol aqueous solution as the main absorption liquid, directly implanted 1uL, and then analyzed by gas chromatograph, and detected and analyzed the air and waste with a hydrogen flame detector. The content of pyridine in. According to experiments, the content of pyridine is 0.01 mg/L, the absorption rate is 98%, the standard deviation rate is 8%, and the relevant standard value for curve sampling is Y=0.9993. According to relevant standards, these values can meet the expected standards and therefore meet the requirements for convenient, accurate and rapid detection of the substance.

Detection and analysis of pyridine in air and exhaust gas Test spectrum: