OV-1毛細管柱測定 合成橡膠膠乳中單體和其他有機成分
如果你感興趣的話,可以電話:0632-5667636
產品名稱:OV-1毛細管柱測定 合成橡膠膠乳中單體和其他有機成分
產品型號:OV-1毛細管柱測定
產品廠商:浩瀚色譜(山東)應用技術開發有限公司
簡單介紹
合成橡膠膠乳中單體和其他有機成分,液化石油氣,二甲醚,甲縮醛,乙縮醛,乙醇,室內空氣,焦?fàn)t煤氣,煉廠氣,天然氣,變壓器油,多氯聯苯,植物油,6號溶劑殘留,裂解進樣器,氨水
OV-1毛細管柱測定 合成橡膠膠乳中單體和其他有機成分的詳細介紹
合成橡膠膠乳中單體和其他有機成分
合成橡膠膠乳中單體和其他有機成分 詳細信息:
名稱:毛細管柱
固定液:二甲基聚硅氧烷
規格:30m*0.53mm*1um-5um
型號:OV-1
應用:SH/T 1760-2007合成橡膠膠乳中殘留單體和其他有機成分的測定 毛細管柱氣相色譜 直接液體進樣法
本標準規定了采用毛細管柱氣相色譜-液體直接進樣法規定合成橡膠膠乳中殘留單體和其他有機成分的方法。
柱效高,分離好,甲苯,乙苯,苯乙烯,1,3-丁二烯,反-2-丁烯,順-2-丁烯,乙烯基環己烯得到徹底分離。
合成橡膠膠乳中單體和其他有機成分 測試譜圖:



Mo nomers and other organic compo nents in synthetic rubber latex
Mo nomers and other organic compo nents in synthetic rubber latex Details:
Name: Capillary Column
Fixing fluid: dimethyl polysiloxane
Specification: 30m*0.53mm*1um-5um
Model: OV-1
Application: SH/T 1760-2007 Determination of residual mo nomers and other organic compo nents in synthetic rubber latex Capillary column gas chromatography Direct liquid injection method
This standard specifies the method of using capillary column gas chromatography-liquid direct injection method to specify residual mo nomers and other organic compo nents in synthetic rubber latex.
With high column efficiency and good separation, toluene, ethylbenzene, styrene, 1,3-butadiene, trans-2-butene, cis-2-butene and vinylcyclohexene are completely separated.
Test spectrum of mo nomer and other organic compo nents in synthetic rubber latex:
合成橡膠膠乳中單體和其他有機成分 詳細信息:
名稱:毛細管柱
固定液:二甲基聚硅氧烷
規格:30m*0.53mm*1um-5um
型號:OV-1
應用:SH/T 1760-2007合成橡膠膠乳中殘留單體和其他有機成分的測定 毛細管柱氣相色譜 直接液體進樣法
本標準規定了采用毛細管柱氣相色譜-液體直接進樣法規定合成橡膠膠乳中殘留單體和其他有機成分的方法。
柱效高,分離好,甲苯,乙苯,苯乙烯,1,3-丁二烯,反-2-丁烯,順-2-丁烯,乙烯基環己烯得到徹底分離。
合成橡膠膠乳中單體和其他有機成分 測試譜圖:



Mo
Mo
Name: Capillary Column
Fixing fluid: dimethyl polysiloxane
Specification: 30m*0.53mm*1um-5um
Model: OV-1
Application: SH/T 1760-2007 Determination of residual mo
This standard specifies the method of using capillary column gas chromatography-liquid direct injection method to specify residual mo
With high column efficiency and good separation, toluene, ethylbenzene, styrene, 1,3-butadiene, trans-2-butene, cis-2-butene and vinylcyclohexene are completely separated.
Test spectrum of mo
相關產品
在線留言
|